HIKVISION DS-7104HGHI-E1 User Manual Download Page 234

Page: 234 / 330

Digital Video Recorder User Manual

233

Figure 14-19

Record Schedule

The POS recording is supported by DS-7300/8100HQHI-F/N and DS-7300/8100/9000HUHI-F/N
series DVR only.

Step 8

Upload the event triggered recording files to the cloud storage.

Back to enter the cloud storage interface, and select the camera you have set in the
recording schedule interface.

Select the upload type in the

Upload Type

text filed.

Check the

Enable Event Upload

checkbox.

Click

Apply

to finish the settings.

Figure 14-20

Upload to Cloud Storage Interface

Summary of Contents for DS-7104HGHI-E1











































































































































































































































































































































Search results

Summary of Contents for DS-7104HGHI-E1

Reviews:

Brands by name

Popular brands

HIKVISION DS-7104HGHI-E1, User Manual

Search results

Summary of Contents for DS-7104HGHI-E1

Reviews:

Brands by name

Popular brands