HD Video and Audio Decoder User Manual
DS-6900UDI Decoder User Manual
74
Decode Thermal Camera on the Video Wall
Figure 5-46
If VCA is enabled for the thermal network camera, the decoder can analyze the VCA
behavior, mark the moving target and track it. You can view the VCA information marked
in the green frames in the live view. If the rule configured for the thermal network camera
is broken, the alarm will be triggered.
If temperature measurement is enabled, you can view the position of the configured
point, line and frame, the ID, and temperature information in the live view.
If fire point detection is enabled and there is a fire point detected, you can view the
configured fire point distance, highest temperature, highest temperature point and fire
point frame in the live view.
If ship detection is enabled and there is a ship detected, you can view the configured
frames and alarm line in the live view.
(Optional) You can click
Window
tab on the bottom of the interface and click
Start Playback
Step 4
to start playing back the camera. Refer to
Chapter 5.3.3 Configuring Playback
for reference.
The temperature measurement, fire source detection, ship detection and VCA information
can be played back.
(Optional) You can click
or click
Stop VCA Decoding
from the right-click menu to stop
Step 5
VCA decoding of the thermal network camera.
Remote Screen Control
5.5
Purpose
Installed with the RSC Server, it allows you to show your PC screen on the video wall. Follow the
following procedure to configure the RSC server and get your screen shown on the video wall.