EN
-
Quick Guide
1
This manual is applicable for the following products:
DS
-
67XX series encoder.
Safety Instruction:
You must carefully read this manual before use and installation of the product and keep this manual
properly.
Warnings:
●
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end
-
user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of
the nation and region. Please refer to technical specifications for detailed information.
●
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
with 100 to 240 VAC or 12 VDC according to the IEC60950
-
1 standard. Please refer to technical
specifications for detailed information.
●
Do not connect several devices to one power adapter as adapter overload may cause
over
-
heating or a fire hazard.
●
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Cautions
●
Ensure unit is installed in a well
-
ventilated, dust
-
free environment.
●
Unit is designed for indoor use only.
●
Keep all liquids away from the device.
●
Ensure environmental conditions meet factory specifications.
●
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
●
Use the device in conjunction with an UPS if possible.
●
Power down the unit before connecting and disconnecting accessories and peripherals.
●
A factory recommended HDD should be used for this device.
●
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.