7
Connecting the RPS DC power cord for the DS-3E2318P-H
and DS-3E2326P-H
The RPS DC power cord is user supplied and must be shorter than 3 m
(9.84 ft).
To connect the RPS DC power cord:
1.
Wear an ESD wrist strap and make sure it makes good skin contact
and is reliably grounded.
2.
Remove the cover from the RPS DC power receptacle, correctly
orient the plug with the power receptacle, and insert the plug into
the receptacle.
3.
Use a flat-head screwdriver to fasten the screws on both sides of
the plug to secure the plug in the power receptacle.
4.
Connect the other end of the DC power cord to the RPS.
5.
Examine the RPS power LED. If it is ON, the power cord connection
is correct.
Figure 7 Connecting the RPS DC power cord
Summary of Contents for DS-3E2300P-H Series
