3
Figure 2 Attaching mounting brackets to the rack posts
NOTE:
Mounting brackets are used only for securing the switch to the rack.
A rack shelf on the rack is required to bear the switch weight.
Horizontal surface mounting
1.
Verify that the horizontal surface is sturdy and reliably grounded.
2.
Place the switch bottom up, and clean the round holes in the
chassis bottom with a dry cloth.
3.
Attach the rubber feet to the four round holes in the chassis bottom.
4.
Place the switch upside up on the horizontal surface.
Summary of Contents for DS-3E2300P-H Series
