DS-3D2228P Hardware Installation Manual
- 18 -
After taking off the cover, put it horizontally and avoid it to be crushed or collided.
Otherwise, the chassis is hard to install.
Closing Chassis
The section mainly describes how to put the cover and close the chassis. Do as
follows:
Put them well according to their locations and joint them together along
their sides.
See the following figure.
When the cover and the bottom are closely tied, let the cover slide the slot
of the front template at the bottom.
Nail the bolt and screw it tightly with the screwdriver.
Reinstall the switch on the cabinet or the desk.
Reconnect all cables of the switch.
