HIKVISION DS-2TD6267-75C4L/W User Manual Download Page 95

Page: 95 / 105

13.4 Export Diagnose Information

Diagnose information includes running log, system information, hardware information.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Diagnose

Information to export diagnose information of the device.

13.5 Reboot

You can reboot the device via browser.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Reboot.

13.6 Restore and Default

Restore and Default helps restore the device parameters to the default settings.
Steps

1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .

2. Click Restore or Default according to your needs.

Restore Reset device parameters, except user information, IP parameters and video format

to the default settings.

Default

Reset all the parameters to the factory default.

Note

Be careful when using this function. After resetting to the factory default, all the

parameters are reset to the default settings.

13.7 Upgrade

Before You Start

You need to obtain the correct upgrade package.

Caution

DO NOT disconnect power during the process, and the device reboots automatically after upgrade.

Steps

1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .

2. Choose one method to upgrade.

Firmware

Locate the exact path of the upgrade file.

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual

Summary of Contents for DS-2TD6267-75C4L/W










































































































Search results

Summary of Contents for DS-2TD6267-75C4L/W

Reviews:

Brands by name

Popular brands

HIKVISION DS-2TD6267-75C4L/W, User Manual

Search results

Summary of Contents for DS-2TD6267-75C4L/W

Reviews:

Brands by name

Popular brands