10.2.14 Set Laser Parameters
Steps
1. Go to Configuration → System → Maintenance → System Service .
2. Enable Laser Optical Axis Adjustment.
3. Adjust the optical zoom ratio to the maximum value via PTZ control panel.
4. Click the direction buttons to adjust the position of laser.
5. Adjust the sensitivity. The higher the value is , the faster the cursor moves.
6. Click Save when the laser point is in the center of live view.
7. Go to Configuration → Image → Display Settings → Image Enhancement to set the laser
compensation region.
8. Adjust the level of laser compensation.
10.2.15 Set Palette
You can select the palette mode to display the thermal grayscale image to colored image.
Steps
1. Go to Configuration → Image → Display Settings .
2. Select the thermal channel.
3. Select a palette mode in Image Enhancement according to your need.
Result
The live view displays the image with palette.
10.2.16 Set Target Color
You can set the color of the targets in different temperature ranges to identify the target quickly.
Steps
1. Go to Configuration → Image → Display Settings .
2. Select the thermal channel.
3. Click Image Enhancement, select Palette as White Hot or Black Hot.
4. Set the temperature value and color of High Temperature, Interval Temperature, or Low
Temperature targets.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
60
