49
User Manual of Thermal Network Speed dome
5.2.4 Configuring Alarm Output
Steps:
1.
Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2.
Select one alarm output channel in the Alarm Output dropdown list.
3. Set a name in
for the alarm output
(optional).
4.
The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual
.
The delay time refers to the time duration that the alarm output remains in effect after
alarm occurs.
5. Click
tab to enter the arming schedule setting interface. The time
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to
Section 5.2.1 Configuring Motion Detection
.
Figure 5-18 Alarm Output Settings
6.
You can copy the settings to other alarm outputs.
7.
Click
to save the settings.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]