HIKVISION DS-2TD4136-25, Quick Start Manual, Page: 23 / 32

Thermal Network Speed dome·Quick Start Guide
17
4.2.1
Activation via Web Browser
Steps:
1.
Power on the system, and connect the system to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
The default IP address of the system is 192.168.1.64.
Figure 4-2
Activation Interface(Web)
3.
Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED – We highly recommend you
create a strong password of your own choosing (using a minimum of 8
characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better
protect your product.
4.
Confirm the password.
5.
Click OK to activate the system and enter the live view interface.
4.2.2
Activation via SADP Software
SADP software is used for detecting the online device, activating the device, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install
the SADP according to the prompts. Follow the steps to activate the system .
Steps:
1.
Run the SADP software to search the online devices.
2.
Check the device status from the device list, and select an inactive device.