Ф
10 mm
(0.39'')
Ф
24 mm
(0.94'')
Drill Template (Type I Camera)
5. Align the hole of drill template with the screw hole of the
junction box base to place the junction box onto the wall.
6. Route the screw through the sealing ring, and fix the junction
box base on the wall with the screws.
Sealing Ring Screw
Installing Junction Box Base
7. Route the cables through the cable hole.
8. Insert the latches into the latch holes to fix the bracket and
camera with the junction box.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]