Cable Description
Name
Description
Power Interface
24V AC and 12V DC are supported. For
12V DC power supply, make sure that
the positive/negative terminals are
connected correctly.
Network Interface
Connect to the LAN interface. PoE+ is
supported for type II camera. Use
switch that supports PoE+ function.
Alarm Interface
Two-way alarm input and alarm output
are supported.
Alarm In: IN1 and G/IN2 and G,
Alarm Out: 1A and 1B/2A and 2B.
Audio Interface
Audio In: Pickup
Audio Out: Loudspeaker
Video Interface
Local video signal output
●
The cables may vary according to different models.
Here we list all types of cables for reference. Take the
actual product for the cables
●
Alarm cables can be classified as 2-ch alarm input
and 2-ch alarm output. ALARM-IN1 and ALARM-IN2
are alarm input interfaces, and G indicates grounding
interface. (1A, 1B) and (2A, 2B) indicate two alarm
output interfaces.
●
To reset the camera to default parameters, you need
to press and hold the RESET button and power on the
camera. After the power on of the camera, you must
still press and hold the Reset button for about 10
seconds.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]