User Manual of Network Speed Dome
© Hikvision
25
3.
Click
to finish the setting of the current preset.
4.
You can click
to delete the preset.
You can configure up to 256 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Figure 4-5
Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset
you want.
Steps:
1.
Select any preset from the list.
2.
Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is the “Start auto scan”. If you call the
preset 99, the speed dome starts auto scan function.
Table 4-3
Special Presets
Special
Preset
Function
Special
Preset
Function
33
Auto flip
93
Set limit stops manually
34
Back to initial position
94
Remote reboot
35
Call patrol 1
96
Stop a scan
36
Call patrol 2
97
Start random scan
37
Call patrol 3
98
Start frame scan
38
Call patrol 4
99
Start auto scan