HIKVISION DS-2CS54D7T-IRS, User Manual, Page: 7 / 10

7. Install the upper cover back by tightening the torx
screws.
Figure 2. 6 Install the Upper Cover
Note:

The camera is in optimum surveillance angle by
default. Slightly adjust the pan tilting angle
according to the actual environment.

The upper cover should be installed before having
the live view
.
Menu Description Chapter 3
Two methods are available to call the menu. This
section takes the method b) as the example to state the
menu operation.
a)
Call the menu and adjust the camera parameters
with a coaxial camera controller (purchase
separately).
b) Call the menu with supported TVI DVR by clicking
button on the PTZ interface, or by calling preset
No. 95.
Camera
TVI DVR
Monitor
Figure 3. 1 Connection
Steps:
1. After the connection is done, power on the analog
camera, TVI DVR, and monitor to view the image on
the monitor.
2. Click PTZ Control to enter the PTZ Control Interface.
3. Call the camera menu by clicking button, or call
preset No. 95.
4. Click up/down direction button to select the item,
click Iris + to confirm the selection, and click
left/right direction button to adjust the value of the
selected item.