Do not aim the camera at the sun or extra bright
places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the
endurance of sensor at the same time.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold, dusty
or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is
required for operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Improper use or replacement of the battery may
result in hazard of explosion. Replace with the same
or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery
manufacturer.
Introduction
Chapter 1
1.1
Product Features
This series of camera adopts high performance CMOS
sensor and advanced circuit board. It features high
resolution, low distortion, and low noise, etc. It is
suitable for surveillance system, and image process
system.
The main features are as follows:
High performance CMOS sensor
1080p resolution
Auto white balance
Auto electronic shutter
Auto gain control (AGC)
True WDR
IR cut filter
Internal 3-axis adjustment
1.2
Overview
Figure 1. 1
Overview of Dome Camera