UM DS-2CE1xU8T-ITx 042618NA
9
Figure 11 Fix the Camera to the Ceiling
Note:
•
The supplied screw package contains self-tapping
screws, and expansion bolts.
•
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5.
Connect the corresponding power cord and video
cable.
6.
Power on the camera to check if the image on the
monitor is at an optimum angle. If not, adjust the
surveillance angle.
Figure 12 3-Axis Adjustment
1).
Loosen the No.1 adjusting screw to adjust the
pan position [0° to 360°]. Tighten the No.1
adjusting screw.
2).
Loosen the No.2 adjusting screw to adjust the
tilting position [0° to180°]. Tighten the No. 2
adjusting screw.
3).
Loosen the No.3 adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.3
adjusting screw.
3.2.2
Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately.
Steps:
1.
Paste the drill template on the ceiling/wall.
2.
Drill screw holes and the cable hole (optional) in
the ceiling/wall according to the holes of the drill
template.
