HIKVISION DS-2CE10KF0T-FS, User Manual, Page: 6 / 15

1.2.3 Overview of Type III Camera
Enclosure
Base
Installation Plate
Microphone
Main Body
Switch Button
Power Cord
Video Cable
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.4 Overview of Type IV Camera
DC 12 V IN
Base
Enclosure
Set Screw
Main Body
Microphone
Switch Button
Video Cable
Power Cord
Figure 1-4 Overview of Type IV Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.5 Overview of Type V Camera
Installation Plate
Base
Enclosure
Switch Button
Main Body
Microphone
Power Cord
Video Cable
Figure 1-5 Overview of Type V Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
2 Installation
Before you start

Make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is power-off
during the installation.

Check the specification of the products for the
installation environment.

Check whether the power supply is matched with
your power output to avoid damage.

Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.

If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.