Network Camera User Manual
45
3.
Configure the NTP settings.
(1)
Click to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP
server.
(3)
(Optional) You can click the
Test
button to test the time synchronization
function via NTP server.
Time Sync by NTP Server
Note:
If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Configure the manual time synchronization.
(1)
Check the
Manual Time Sync.
item to enable the manual time
synchronization function.
(2)
Click the icon
to select the date, time from the pop-up calendar.
(3)
(Optional) You can check
Sync. with computer time
item to synchronize the
time of the device with that of the local PC.