DS-1000KI Keyboard User Manual
Copyright
©
2005. All rights reserved.
Page 11
2.2
Keyboard Configuration
Before controlling DVR, you should first configure DS-1000KI net keyboard
including system configuration, user configuration and defense configuration. Press the
key
【
Menu
】
for more than 2 seconds, you will enter into the keyboard configuration (the
administrator password is needed to login), as shown in Fig 2.1.1
Fig 2.2.1 Keyboard Configuration
2.2.1 System Configuration
After entering into the configuration interface, we could see three corresponding
menu items named “SysCfg” (Keyboard System Configuration), “UserCfg” (User
Configuration) and “ArmCfg” (Defense Configuration) on the menu screen. Press
“SysCfg” and enter into the system configuration interface, as shown in Fig 2.2.2. In
this configuration menu, you can setup all detail keyboard parameters such as Keyboard
IP, Keyboard ID, port number, super password, operator password and controlling
modes. Each parameter setting is shown below: