DeepinMind Series NVS User Manual
iDS-67 00 Deep inMind Series NVS User Manua l
41
Figure 4-19
Hik-Connect Settings
Hik-Connect is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms page pops up and you should read
Terms of Service and Privacy Policy before enabling it.
Step 3
If you want to customize the server, enable
Custom
and enter the
Server Address
in the text
field.
Step 4
Click
Save
.
After configuration, you can access and manage the encoder by your mobile phone on which the
Hik-Connect application is installed or by the website (www.hik-connect.com).
Please refer to the help file on the official website (www.hik-connect.com) and the
Hik-Connect
Mobile Client User Manual
for adding the device to Hik-Connect and more operation instructions.
4.3.9 Configuring Multicast Address
The multicast address can be configured to realize live view for more than the maximum number of
cameras through network.
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended
to use the IP address ranging from 239.252.0.0 to 239.255.255.255.
Step 1
Go to
Configuration > Network > Advanced Settings > Other
to enter the multicast address
settings interface.
