E Series Network Speed Dome
·
Quick Start Guide
7
Steps:
1.
Install the memory card.
1)
Loosen the lock screws on the speed dome bubble and remove the bubble.
2)
Remove the protective lens cover, foam, and sticker.
Lens Cover
Protective Sticker
Protective Foam
Bubble
Figure 2-2
Remove the Protective Accessories
3)
Align the memory card with the memory card slot and insert it.
Memory Card Slot
Figure 2-3
Memory Card Slot
4)
Install the bubble back and tighten the lock screws.
2.
Install the bracket.
1)
Get the bracket and screws from the packing box as shown in Figure 2-4.
Figure 2-4
Wall Mounting Bracket
2)
Drill four screw holes in the wall according to the holes on the bracket, and then
insert four M8 expansion screws into the mounting holes.