HIKVISION CSR-IM, User Manual, Page: 8 / 18

The radar has wireless module, which could connect upper computer, through the laptop or desktop
computer with WIFI module without USB-RS485 connection cable. The signal cables of the radar and
camera can be connected directly in the case of WIFI connection, as shown in table 3.3.
Table 3.3: Connection of Radar and Camera and Power Supply
Radar Connection Camera
Power supply RS485 RS485 Power supply Internet access
Red
（
+12V
）
Brown
（
A+
）
Brown
（
A+
）
Red
（
+12V
）
Connect to the
Laptop Internet
Access
Black
（
GND
）
White
（
B-
）
White
（
B-
）
Black
（
GND
）
3.2 Before connected to upper computer software:
Connect the radar to WIFI, power on the radar, and connect radar to camera signal cable. Steps to
achieve the radar wireless connection are shown as below:
(1) As shown in figure 3.1, open WIFI module in the laptop, search WIFI hotspot, click WIFI hotspot of
prefix “USR-WIFI” to connect.
Figure 3.1: connect wireless hotspot of prefix “USR-WIFI”
(2) As shown in figure 3.2, set local IP to10.10.100.100.set subnet mask to 255.255.255.0, set gateway
to 10.10.100.255, set DNS to 10.10.100.254.
Figure 3.2: IP address setting