(h). After the radar is calibrated correctly, it can be estimated that whether the target display coincided
with the real traffic situation or not on target simulation interface. As shown in figure 3.18
Figure 3.18:
Target simulator interface
(i). Click advanced options to display advanced options dialog box. As shown in figure 3.19.
Figure 3.19: click advanced options to display advanced options dialog box
(j).In advanced options dialog box, you can set velocity range
，
distance range and other technical
parameters, as shown in figure 3.20. When you have set relevant parameters successfully, it will
display in status display column as shown in figure 3.21.
Figure 3.20: check cart mode and click ok button
Figure 3.21: log in status display column
(k). The radar target display runs well, it means no display omission (no lane display error or other error),
estimated by observing the target display in target simulation interface. Choose the snapshot lane, in
the output setting column which is used for controlling camera snapshot, then click “debug finished ,
connect to camera” button, then radar is ready for triggering camera to snapshot, as shown in figure
3.22.