background image

User Manual 

COPYRIGHT © 2015 Hangzhou Hikvision Digital Technology Co., Ltd.   

ALL RIGHTS RESERVED. 

Any and all information, including, among others, wordings, pictures, graphs 

are the properties of Hangzhou Hikvision Digital  Technology Co., Ltd. or  its 

subsidiaries  (hereinafter  referred  to  be  “Hikvision”).  This  user  manual 

(hereinafter referred to  be “the Manual”) cannot be reproduced, changed, 

translated,  or  distributed,  partially  or  wholly,  by  any  means,  without  the 

prior written permission of Hikvision. Unless otherwise stipulated, Hikvision 

does  not  make  any  warranties,  guarantees  or  representations,  express  or 

implied, regarding to the Manual. 

About this Manual 

This Manual is applicable to DS-K1108 series card reader 

The  Manual  includes  instructions  for  using  and  managing  the  product. 

Pictures,  charts,  images  and  all  other  information  hereinafter  are  for 

description and explanation only. The information contained in the Manual 

is  subject  to  change,  without  notice,  due  to  firmware  updates  or  other 

reasons.  Please  find  the  latest  version  in  the  company  website 

(http://overseas.hikvision.com/en/).   

Please use this user manual under the guidance of professionals. 

Trademarks Acknowledgement 

and other Hikvision’s trademarks and logos are the properties of Hikvision in 

various jurisdictions. Other trademarks and logos mentioned below are the 

properties of their respective owners. 

Legal Disclaimer 

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT 

DESCRIBED,  WITH  ITS  HARDWARE,  SOFTWARE  AND  FIRMWARE,  IS 

PROVIDED “AS IS”, WITH ALL FAULTS AND  ERRORS,  AND HIKVISION MAKES 

NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, 

MERCHANTABILITY,  SATISFACTORY  QUALITY,  FITNESS  FOR  A  PARTICULAR 

Summary of Contents for 6954273653712















Reviews: