7
3.4
Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for RS-485 communication mode:
1.
Set the DIP switch of No. 6 as 0.
2.
Set the DIP switch of No. 1 ~ 5 for RS-485 address and
reading card mode. For details, please refer to
3.
Wire the cable between controller and card reader as
shown below.
Figure 3-4
Wiring for RS-485 Communication Mode
Steps for Wiegand communication mode:
Summary of Contents for 6954273653712
Page 1: ...DS K1108 Series Card Reader User Manual UD01841B ...
Page 14: ...11 ...
