7.2.4 Set Wiegand Parameters
You can set the Wiegand transmission direction.
Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.
Figure 7-7 Wiegand Settings
3. Enable the Wiegand function.
4. Select a transmission direction.
●
Output: A face recognition terminal can connect an external access controller. And the two
devices will transmit the card No. via Wiegand 26 or Wiegand 34.
●
Input: A face recognition terminal can connect a Wiegand card reader.
5. Tap to save the network parameters.
Note
If you change the external device, and after you save the device parameters, the device will
reboot automatically.
7.2.5 Set ISUP Parameters
Set ISUP parameters and the device can upload data via ISUP protocol.
Before You Start
Make sure your device has connect to a network.
Steps
1. Tap Comm. → ISUP .
DS-K1T673 Series Face Recognition Terminal User Manual
50
