Note
If the peripheral card reader supports presenting EM card, the function is also supported to
enable/disable the EM card function.
Enable DESFire Card
The device can read the data from DESFire card when enabling the DESFire card function.
DESFire Card Read Content
After enable the DESFire card content reading function, the device can read the DESFire card
content.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → General → Card Authentication Settings .
Select a card authentication mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
8.5.20 Video Intercom Settings
Set Video Intercom Parameters
The device can be used as a door station, outer door station, or access control device. You should
set the device No. before usage.
Click Configuration → Intercom → Device No. .
If set the device type as Door Station or Access Control Device, you can set the floor No., door
station No., and click Advanced Settings to set Phase No., Building No., and Unit No.
Click Save to save the settings after the configuration.
Device Type
The device can be used as a door station or outer door station. Select a device type from the
drop-down list.
DS-K1T673 Series Face Recognition Terminal User Manual
102
