ch3.2 to find the client software operations.
2.
Use DNS service for WAN access.
You will need a PC connected to Internet with static IP that owns software providing DNS service at the
same time(such as IP Server)(the PC is so-called DNS server).You can also register a domain name
through the DNS service dealer and visit it with the domain name.
When network camera is connected to WAN with PPPoE, it will get an IP address, and send its name and
the IP to the DNS server. The client software will immediately connect to the PC that used as the DNS
server to tell it which network camera is waiting for access. Then the server will search for all the
registered network cameras, and match the camera with this IP. When the IP address is returned, the
client software will connect to the network camera to get the video.
Operations: Run the client software 4.01, select “Configure”
“Server Configuration” select
network camera.
In the right tree, input “Server Name” & “DNS Host IP” in the “Server Configuration” box as Fig
4.1, and click “Confirm”. Select “Configure”-> “Device Management”, double click the network
camera name you just added, the “server attribute” message box will pop up as Fig. 3-5-2. Make sure
that the “sever name” is consist with the sever name in “remote config”; and select “private DNS” in
“register mode”; then input the IP address of DNS server in “DNS address”, click “Confirm”. Then
you can preview the picture in the “preview” menu.
23