HikRobot SC3000 Series, Quick Start Manual

Page: 12 / 32

SC3000 Series Vision Sensor Quick Start Guide
4
Chapter 3 17-Pin Interface
Read the following section to get definitions of 17-pin interface.
Figure 3-1 17-Pin Interface
Table 3-1 Pin Definitions
No. Signal I/O Signal Source Description Cable Color
1 POWER_IN -- Direct current power supply positive Red
2 I/O_1 Line 3 signal line Can be configured as input or output Brown
3 DO_2 Line 7 signal line Opto-isolated output Purple/white
4 RS232TX -- RS232 serial port output Green
5 RS232RX -- RS232 serial port input Green/white
6 MDI0+ -- Fast Ethernet signal MDI0+ Yellow
7 MDI1- -- Fast Ethernet signal MDI1- Orange/white
8 DO_0 Line 5 signal line Opto-isolated output Blue/white
9 I/O_0 Line 2 signal line Can be configured as input or output Blue
10 DO_1 Line 6 signal line Opto-isolated output Brown/white
11 GND Signal ground Direct current power supply negative Black
12 IN_COM
Line 2/3/4 input
signal ground
Input signal ground
Pink
13 I/O_2 Line 4 signal line Can be configured as input or output Purple
14 MDI0- -- Fast Ethernet signal MDI0- Yellow/white