HikRobot ID2000 Series User Manual Download

Page: 65 / 111

ID2000 Series Smart Code Reader User Manual

continuous. Usually the continuous code uses squares as the minimum units.

Discrete

stands for the minimum units in the "L" shaped sides of the DM code are discrete, or

the minimum units in the concentric square like

in the QR code are discrete. Usually

the discrete code uses dots as the minimum units.

Adaptive

stands for the device can recognize both continuous code and the discrete code.

QR Distortion Correction

If the QR code or DM code is distorted, you can enable this parameter to improve code
recognition rate.

Note

If you enable this parameter, the more time will be consumed to recognize the codes in the
image.

Advance Param

This parameter is applicable to some special codes, and it is recommended to use the default
value.

DM Code Shape

It defines the recognizable code shape.

Square

stands for square mode: If the 2D code is square

shaped, it can be recognized by the device.

Rectangle

stands for rectangle mode: If the 2D code

is rectangle shaped, it can be recognized by the device.

Adaptive

stands for compatible mode:

The device can recognize 2D codes of both the above-mentioned two shapes.

DM Code Type

It includes

All

ECC140

, and

ECC200

2D Code Quality Enable

Refer to section

Set 2D Code Quality Evaluation

for details.

Code Score Enable

If it is enabled, the device will evaluate code quality and display overall grade and code score in
history record area of the client software. The higher the score, and the better the code quality.

Accurate Timeout Enable

If it is enabled, the accuracy of algorithm timeout will improve.

8.2.5 Set 2D Code Quality Evaluation

After

Code Quality Enable

, you can set specific parameters according to actual demands.

Note

●

The function of code quality evaluation may differ by device models.

●

In test mode, this function is enabled by default. In normal mode, you need to enable it
manually.

Summary of Contents for ID2000 Series
















































































































Search results

Summary of Contents for ID2000 Series

Reviews:

Related manuals for ID2000 Series

Brands by name

Popular brands

HikRobot ID2000 Series, User Manual

Search results

Summary of Contents for ID2000 Series

Reviews:

Related manuals for ID2000 Series

Brands by name

Popular brands