English
30
BATTERY REMOVAL / INSTALLATION
1. Battery
removal
Hold the handle tightly and push the battery
latches to remove the battery (see
Fig. 3, 4
).
CAUTION
Never short-circuit the battery.
2. Battery
installation
Insert the battery while observing its polarities
(see
Fig. 4
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle, the
pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 5
.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in red.
When the battery becomes fully recharged, the pilot lamp will
blink in red. (At 1-second intervals) (See
Table 2
)
Fig. 3
Latch
Ventilation holes Terminals
Battery cover
Latch
Battery
Pull out Insert
Push
Fig. 4
Handle
Battery
Charger
Pilot lamp
Fig. 5
00Book̲WH18DE̲ChS.indb 30
00Book̲WH18DE̲ChS.indb 30
2022/01/28 9:54:41
2022/01/28 9:54:41
