English
39
NOTE
During operation, the unit can generate static electricity which may cause the motor to stop.
This is a protective feature and not a malfunction. Draw the switch in once again to restart
the motor.
HOW TO RECHARGE USB DEVICE
WARNING
○
Prior to use, check the connecting USB cable for any defect or damage.
Using a defective or damaged USB cable can cause smoke emission or ignition.
○
When the product is not being used, cover the USB port with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke emission or ignition.
NOTE
○
There may be an occasional pause during
USB recharging.
○
When a USB device is not being charged,
remove the USB device from the charger.
Failure to do so may not only reduce the
battery life of a USB device, but may also
result in unexpected accidents.
○
It may not be possible to charge some USB
devices, depending on the type of device.
(1) Select a charging method
Depending on the charge method selected,
either the battery is inserted into the
charger or the power cord is plugged
into an outlet.
○
Charging a USB device from a electrical
outlet. (
Fig. 14
-
a)
○
Charging a USB device and battery
from a electrical outlet. (
Fig. 14
-
b)
(2) Connect the USB cable. (
Fig. 15
)
Pull back the rubber cover and
fi
rmly
plug in a commercially available USB
cable (appropriate to the device being
charged) into the USB port.
(3) When charging is completed
○
To verify charge status, check the USB
device.
○
Unplug the power cord from the
electrical outlet. (
Fig. 16
)
○
Place the rubber cover over the USB port.
a
b
Fig. 14
Rubber cover
USB cable
USB port
Fig. 15
Rubber cover
USB cable USB port
Fig. 16
00Book̲RB18DC̲ChS.indb 39
00Book̲RB18DC̲ChS.indb 39
2021/06/10 16:20:16
2021/06/10 16:20:16
