English
38
2. When using the Cordless Blower for
dust collection
(1) Mounting the Dust Bag
Mount the dust bag on the blast port,
following the same procedure described
above for mounting of the nozzle (
Fig. 10
).
(2) Mounting the NozzIe
Insert the pin located outside the nozzle into
the groove provided on the suction port, and
fully turn the nozzle toward the arrow in
Fig. 11
until a click is heard.
SWITCH AND AIR VOLUME CONTROL
○
Switch operation (
Fig. 12
).
When the switch is depressed, the blower rotates.
When the switch is released, the blower stops.
The volume can be adjusted for a variable amount
depending on how much the switch is drawn in.
○
Continuous operation (
Fig. 12
)
Draw the switch as far as it goes and press the ON
lock button to lock in place the operating state of the
tool for continuous operation.
The ON lock button can be activated by pressing
either side of the switch.
To discontinue operation, draw the switch in once
again to release the ON lock button.
○
Air volume control function (
Fig. 13
)
When the switch is fully drawn, the air volume can be
adjusted to High, Medium, or Low.
Lever position
Air volume
3
High
2
Medium
1
Low
Fig. 10
Pin
Groove
Dust bag
(sold separately)
Blast port
Fig. 11
Pin
Groove
Nozzle
Suction port
Fig. 12
ON lock button
Switch
Fig. 13
Air volume changing lever
00Book̲RB18DC̲ChS.indb 38
00Book̲RB18DC̲ChS.indb 38
2021/06/10 16:20:16
2021/06/10 16:20:16
