English
10
(2) Remove the pre
fi
lter. (
Fig. 6
)
Turn the pre
fi
lter clockwise to remove it from the housing.
(3) Check the
fi
lter (
Fig. 7
)
After removing the pre
fi
lter, check to see if the
fi
lter is installed.
Also, check to see if the edges of the
fi
lter are turned up or not.
NOTE
If
the
fi
lter is not properly
fi
tted, dirt or grime can enter the fan unit and cause damage or
malfunction.
(4) Install the
fi
lter (
Fig. 8
)
Fit
the
fi
lter over the
fi
lter holder.
(5) Install the pre-
fi
lter (
Fig. 9
)
When installing the pre
fi
lter, press the housing on with the projections in a horizontal
position. Then, turn the pre-
fi
lter until the projections are
fi
xed in the grooves of the
housing.
(6) Install the dust case (
Fig. 10
)
Place the dust case over the housing, making sure that the protruding marks on both
are aligned. Then, turn the dust case clockwise for approximately 120 degrees.
Fig. 8
Filter
Filter Holder
Fig. 5
Housing
Align the
protruding marks
Remove
Inlet Port Dust Case
Fig. 7
Filter
Pre Filter
Fig. 9
1
Push in
2
Turn to secure
Housing Grooves
Pre Filter
Projections
Hold here
Fig. 10
1
Align the
protruding
marks
2
Turn clockwise for
approximately 120
degrees
Housing
Protruding
Marks
* The dust case can also
be installed with the
nozzle facing upwards.
Dust Case
Dust Case
Fig. 6
1
Turn clockwise
2
Remove
Housing
Hold here
Pre Filter
000Book̲R10DAL̲ChS.indb 10
000Book̲R10DAL̲ChS.indb 10
2017/12/07 17:19:56
2017/12/07 17:19:56
