English
37
—
Ensure that the abrasive product is correctly mounted
and tightened before use and run the tool at no-load for
30 seconds in a safe position, stop immediately if there
is considerable vibration or if other defects are detected.
If this condition occurs, check the machine to determine
the cause;
—
If a guard is equipped with the tool never use the tool without such a guard;
—
When using a abrasive cutting wheel, be sure to remove the standard accessory
wheel guard and attach the wheel guard with side guard (sold separately) (Fig. 1);
—
Do not use separate reducing bushings or adapters to adapt large hole abrasive
wheels;
—
For tools intended to be
fi
tted with threaded hole wheel, ensure that the thread in
the wheel is long enough to accept the spindle length;
—
Check that the work piece is properly supported;
—
Do not use cutting o
ff
wheel for side grinding;
—
Ensure that sparks resulting from use do not create a hazard e.g. do not hit
persons, or ignite
fl
ammable substances;
—
Ensure that ventilation openings are kept clear when working in dusty conditions, if
it should become necessary to clear dust,
fi
rst disconnect the tool from the mains
supply (use non metallic objects) and avoid damaging internal parts;
—
Always use eye and ear protection. Other personal protective equipment such as
dust mask, gloves, helmet and apron should be worn;
—
Pay attention to the wheel that continues to rotate after the tool is switched o
ff
.
—
Do not allow foreign matter to enter the hole for connecting the rechargeable
battery.
—
Never disassemble the rechargeable battery and charger.
—
Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
—
Do not dispose of the battery in
fi
re.
If the battery burnt, it may explode.
—
Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or in
fl
ammables into the charger air ventilation slots will
result in electrical shock hazard or damaged charger.
—
Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
Fig. 1
Side guard
000Book̲G3610DA̲ChS.indb 37
000Book̲G3610DA̲ChS.indb 37
2021/05/10 12:09:06
2021/05/10 12:09:06
