HIKOKI DS 36DAX Handling Instructions Manual Download Page 10

10

REGARDING LITHIUM-ION BATTERY 

TRANSPORTATION

When transporting a lithium-ion battery, please observe the 

following precautions.

WARNING

Notify the transporting company that a package contains a 

lithium-ion battery, inform the company of its power output 

and follow the instructions of the transportation company 

when arranging transport.

  Lithium-ion batteries that exceed a power output of 

100 Wh are considered to be in the freight classi

fi

 cation 

of Dangerous Goods and will require special application 

procedures.

 For transportation abroad, you must comply with 

international law and the rules and regulations of the 

destination country.

Wh

Power Output

2 to 3 digit number

USB DEVICE CONNECTION 

PRECAUTIONS (UC18YSL3)

When an unexpected problem occurs, the data in a USB 

device connected to this product may be corrupted or lost. 

Always make sure to back up any data contained in the USB 

device prior to use with this product.

Please be aware that our company accepts absolutely no 

responsibility for any data stored in a USB device that is 

corrupted or lost, nor for any damage that may occur to a 

connected device.

WARNING

  Prior to use, check the connecting USB cable for any 

defect or damage.

  Using a defective or damaged USB cable can cause 

smoke emission or ignition.

  When the product is not being used, cover the USB port 

with the rubber cover.

  Buildup of dust etc. in the USB port can cause smoke 

emission or ignition.

NOTE

 There may be an occasional pause during USB 

recharging.

  When a USB device is not being charged, remove the 

USB device from the charger.

  Failure to do so may not only reduce the battery life 

of a USB device, but may also result in unexpected 

accidents. 

  It may not be possible to charge some USB devices, 

depending on the type of device.

NAMES OF PARTS (Fig. 1 – Fig. 18)

Shift knob

Housing

Rubber cap

Latch

Front case

Charge indicator lamp

Clutch dial

Protruding portion of 

the side handle

Sleeve

Drill mark

Trigger switch

Triangle mark

LED light

Hammer mark

Battery

Screw

Hook

Groove

Strap

Remaining battery 

indicator switch

Handle

Remaining battery

indicator lamp

Push button

Display panel

Side handle

Rubber cover

Ventilation holes

USB port

Motor

USB cable

SYMBOLS

WARNING

 

The following show symbols used for the machine. 

Be sure that you understand their meaning before 

use.

DS36DAX: Cordless Driver Drill

DV36DAX: Cordless Combi Drill

To reduce the risk of injury, user must read 

instruction manual.
Only for EU countries 

Do not dispose of electric tools together with 

household waste material!

In observance of European Directive 2012/19/EU 

on waste electrical and electronic equipment 

and its implementation in accordance with 

national law, electric tools that have reached 

the end of their life must be collected separately 

and returned to an environmentally compatible 

recycling facility.
Direct current

V

Rated voltage

n

0

No-load speed

min

-1

Oscillation per minute

Bpm

Impact rate

Ls

Low speed

Hs

High speed
Brick

Wood

Metal

0000Book̲DS36DAX.indb   10

0000Book̲DS36DAX.indb   10

2021/04/15   14:21:25

2021/04/15   14:21:25

Summary of Contents for DS 36DAX

























Reviews: