6
APPLICATIONS
○
Cutting metal and stainless steel pipe.
○
Cutting various lumber.
○
Cutting mild steel, aluminum and copper plate.
○
Cutting synthetic resins, such as phenol resin and vinyl
chloride.
SPECIFICATIONS
Model
CR18DBL
Voltage
18 V
No-Load Speed
0 – 2500 min
–1
Stroke
32 mm
Capacity
Mild Steel Pipe
O.D. 130 mm
Vinyl Choride
Pipe
O.D. 130 mm
Wood
120 mm
Mild Steel Plate
19 mm
Weight
3.4 kg (BSL1850)
3.4 kg (BSL1860)
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect to the power source. (Fig. 3 on page 14)
When charging the battery from an AC power source
○
Connect the charger's power cord to the receptacle.
<UC18YFSL>
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1-second intervals).
<UC18YSL3>
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1-second
intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger. (Fig. 3 on
page 14)
Firmly insert the battery into the charger.
3. Charging
<UC18YFSL>
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See
Table 1-a
)
●
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1-a
, according to the condition of the charger or
the rechargeable battery.
<UC18YSL3>
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See
Table 1-b
)
●
Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in
Table 1-b
, according to the condition of the
charger or the rechargeable battery.
Table 1-a
Indications of the pilot lamp
The pilot
lamp
lights or
blinks.
Before
charging
Blinks (red)
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
While charging Lights (red)
Lights continuously
Charging
complete
Blinks (red)
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Charging
impossible
Flickers (red)
Lights for 0.1 seconds. Does not light for 0.1
seconds. (o
ff
for 0.1 seconds)
Malfunction in the
battery or the charger
Overheat
standby
Blinks (red)
Lights for 1 second. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
NOTE:
When standby for cooling battery, UC18YFSL cools the overheated battery by cooling fan.
0000Book̲CR18DBL.indb 6
0000Book̲CR18DBL.indb 6
2017/12/05 10:33:51
2017/12/05 10:33:51
