English
22
3. Adjusting the angle of inclination
As shown in
Fig. 5
,
Fig. 6
by loosening the wing-nut on the incline gauge and the wing-bolt
on the base, the saw blade may be inclined to a maximum angle of 45° in relation to the
base. After having completed the adjustment, recon
fi
rm that the wing-nut and the wing-bolt
are
fi
rmly tightened.
Wing-bolt
Base
Fig. 6
Wing-nut
Base
Fig. 5
4. Regulating the guide (
Fig. 7
)
The cutting position can be regulated by moving
the guide to the left or right after loosening its
wingbolt. The guide may be mounted on either
the right or left side of the tool.
5. Adjusting the guide piece
On the circular saw, it is possible to make
fi
ne
adjustment of the
fi
xing position of the guide
piece, where the saw blade and the premarked
line are to be aligned.
When the saw is shipped from the
factory, the linear portion of a front
scale on the guide piece is aligned with
the central position of the saw blade
(
Fig. 8
).
Loosen
the
fi
xed M4 screw on the
guide piece, should the
fi
xing position
be wrong, and make necessary
adjustment of the position.
Wing-bolt
Guide
Fig. 7
Lock spring
Fig. 8
Premarked line
Front scale
at 45° incline
M4 Screw
Premarked line
Front scale when
not inclined
Guide piece
Saw blade
000Book̲C7U3̲ChS.indb 22
000Book̲C7U3̲ChS.indb 22
2018/03/27 14:34:52
2018/03/27 14:34:52
