4
．
Proper operation
使用說明
22
4.10
過線油組
4.10
SP device
當機器在高速運轉或使用特殊線或特殊纖維時，矽
油壺組是標準配備，以防止斷線跳針。
當使用機器時，將毛氈
○
1
放入矽油壺
○
2
內。
(Fig.33)
SP device (needle thread oiling) is equipped as
standard to prevent thread breakage and skip
stitch when running a machine at high speed or
using synthetic thread and/or synthetic fabric.
Fix the felts
○
1
included accessories into the SP
tank
○
2
when using. Fig.33
注意：
1.
當不使用矽油壺組時，要取出毛氈
○
1
。不然可能在車縫時發生不正常情況。
2.
當矽油沾到其他零件時，可能引起機器損傷，故要將油擦乾淨。
CAUTION
1. When not using SP device, remove the felts
○
1
. If not, it may occur irregular condition during
sewing.
2. If the silicone oil sticked to the parts other than SP device, it can cause the machine damage.
Be sure to wipe it away.
使用乙烷樹脂
打開油壼蓋
○
3
，檢查油量。如果不夠，添加油於油壼
○
2
。
Use dimethy 1 silicone oil
Open the oil cup lid
○
3
and check the oil amount.If not enough, supply oil into the SP tank
○
2
.
