28
Please Give Part No., Description
& Unit Serial No.
307306-B
Page Rev. A
NL450C
NEW LEADER
HEADER
GENERAL OPERATING PROCEDURES CONTINUED
REAR PULLING LUGS
NOTICE!
Do not pull implement sideways—always pull straight. Always disconnect tractor from implement
before using rear lugs. Otherwise, damage to implement may occur.
NOTICE!
Failure to raise jack before pulling stuck implement will destroy jack.
If the implement gets stuck,
attempt to dislodge the
implement by powering the
tractor. If that is unsuccessful:
empty
spreader;
shut
off tractor power; lower
jack, disconnect tractor
and all connections; hook
appropriate chain to left and
right hand rear pulling lugs
(Figure 14); fasten chains
to tractor; raise jack; and
engage tractor to dislodge
implement.
REAR
PULLING
LUGS
Figure 14 - Rear Pulling Lugs
IMPLEMENT MANEUVERING
WARNING
Make sure the area behind the trailer is clear of obstructions and personnel. Turning or
backing may result in limited visibility. Check blind spots. Back and/or turn cautiously.
Failure to do so could result in death, serious injury or damage to the implement.
WARNING
Maintain reasonable speeds. Consider rough terrain including obstacles such as terraces,
ditches, and approaching angles. Know the limits of hitch angles. Failure to do so could
result in tipping of implement, bottoming of suspension, jack-knifing, spillage or loss of
material and other damages to the implement and/or tractor, resulting in serious injury
or death.
Backing & Turning Tips
NOTICE!
Turning and backing at sharp angles will cause the tractor and implement to jack-knife. DO NOT
exceed maximum turning angle of 60°.
OPER. & MAINT
.
OPERA
TING PROCEDURES
