L4000G4
NEW LEADER
HEADER
15
Please Give Part No., Description
& Unit Serial No.
307074-D
Page Rev. A
GENERAL DESCRIPTION
The Model L4000G4 is a hopper type spreader intended for spreading free flowing granular agricultural materials,
such as chemical fertilizers, agricultural limestone, and gypsum. It is intended for truck chassis or agricultural vehicle
mounting.
The unit is powered hydraulically and provides independent variable speed control for the spinner and full automatic
ground speed control for the conveyor. The hydraulic pump, which provides the hydraulic power, is a gear type
pump and is driven by means of a transmission PTO.
The dual conveyors deliver material to the spinners through an adjustable metering gate at the rear of the hopper
body. Orbital type hydraulic motors mounted to 6 to 1 ratio spur gear case on the L4000G4 drive the conveyor. The
conveyor options include a pintle type chain joined by cross bars every (#3) link or a belt-over-chain type having
parallel strands of pintle type (#4) chain joined by cross bars every other link.
The distributor spinner assembly has two 24-inch (60.96 cm) diameter dished discs. Each disc has four formed and
heat treated fins that are adjustable to radial angle. The spinner is fully adjustable by means of a rotating handle.
The optional 304 stainless steel hopper style spreader MultApplier or MultiBin may be insterted in the main bin.
• Inserting the MultApplier allows for two materials to be spread simultaneously. It features a 24-inch (60.96
cm) belt-over-chain type conveyor having parallel strands of pintle type (#4) chain joined by cross bars every
other link. The direct driven conveyor is also controlled independently enabling the distribution of material at
variable rates through the adjustable gate at the rear of the hopper body. The hillside divider improves material
placement on the spinner for a more effective spread pattern.
• Inserting the MultiBin will convert the spreader to a 3 or 4 hopper unit, which can be used independently or
together for straight and variable rate applications. The front two hoppers dispense fertilizer products while
the single or dual hopper at the rear dispense(s) micronutrients or seeding products. The micronutrient hopper
features a removable internal panel to convert between 3 and 4 bin configurations. The rear bin(s) are sloped
forward to improve chassis weight distribution. Material is distributed from the front bin by conveyor and from
the rear bin(s) by passing through a meter wheel, material dividers and 24-inch (60.96 cm) diameter dished
discs. Bin sensors are installed to warn when materials are low in each micronutrient bin.
The MultiBin also comes equipped with an upper and lower material divider which improves material placement
on the spinner for a more effective spread pattern.
There is an optional micronutrient stainless steel cover which opens and closes with a stainless steel air
cylinder.
Screens installed on micronutrient bins break up material as it enters the bins.
This product is intended for commercial use only.
O
P
E
R
.
&
M
A
I
N
T
.
G
E
N
E
R
A
L
D
E
S
C
R
I
P
T
I
O
N
All manuals and user guides at all-guides.com
