HighPoint CLI Reference
[88-100] Highest
Example
HighPoint CLI> set RP=50
set {controller} AR=[y|n]
Set enable or disable to the [Auto Rebuild] parameter.
Example
HighPoint CLI> set AR=y
set {controller} CE=[y|n]
Set enable or disable to the [Continue Rebuilding On Error] parameter.
Example
HighPoint CLI> set CE=y
set {controller} BP=[y|n]
Set enable or disable beeper.
Example
HighPoint CLI> set BP=y
set {controller} SD=[minutes]
Set value of [Spindown Idle Disk]
Example
HighPoint CLI> set SD=10
Setting device parameters
Syntax: set {device id} tcq=[y|n] ncq=[y|n] wc=[y|n] ra=[y|n] smart=[y|n]
The options are:
z
tcq=[y|n]
Set enable or disable to the tcq parameter.
- 21 -
