HighPoint CLI Reference
SAF-TE Commands
The SAF-TE command is used to manage SAF-TE enclosures. This command
only works when you have SAF-TE enclosure information properly configured in
HighPoint RAID management service.
To use HighPoint RAID management service with SAF-TE enclosures, a
customized configuration file (/etc/I2csep.conf) is needed. By default no config
file is setup; you can copy one of the provided configuration file under
/usr/share/hpt/hptsvr-
xxx
/ (*.conf) to /etc/I2csep.conf to enable support for
SAF-TE enclosures. The RAID management service (hptsvr) needs to be
restarted when the configuration file is updated.
Syntax
SAF-TE
SAF-TE set {property_index} value
SAF-TE
This command will display the enclosure status information.
Example
HighPoint CLI> SAF-TE
Typical output:
Index
Name Value Status Editable
0
Temperature 38
False
1
Fan Speed 2960 False
2
Temperature Limit 60
True
SAF-TE set {property_index} value
This command updates the value of a specified enclosure property.
Example
HighPoint CLI> SAF-TE set 2 66
- 13 -
