HighLine BM1400, Operating Manual

Page: 44 / 53

Section 5 - Maintaining the Bale Mover
Tire Changing Procedures
Before beginning, make sure the
tractor is turned off and the
parking brake is set.
Securely block the Bale Mover
before any work is done around or
under the machine.
Relieve hydraulic pressure and
disconnect the hydraulic hoses.
1. Hitch the Bale Mover to the tractor.
2. Block the Bale Mover tires on the
opposite side to prevent movement of the
Bale Mover.
3. Use two jacks under the main frame of
the Bale Mover (at the positions shown by
the arrows).
-
Raise the side of the Bale Mover high
enough to be able to rotate the axle
so the tire can be removed.
4. Block the Bale Mover frame in this raised
position.
5. With the tires off the ground, rotate the
axle so the tire is below the frame.
- Block up the axle so that it cannot
rotate when the tire is removed. The
weight of the remaining tires will want
to rotate the axle.
6. Change the tire.
Jack on Frame to Change Tire
211067C
Block to Prevent Rotation When Tire Removed
211069
Page 5-5