APPLIANCE OPERATION MANUAL
-6
GENERAL ASSEMBLY PROCEDURE FOR INSTALLATION
Ensure all packaging, including polystyrene, plastic and cardboard has been removed from around the appliance
and burner area.
Ensure that all burner(s), trivets, grates and panels are correctly located and supported.
ABNORMAL OPERATION
If you are aware of any change in the operation of the appliance consult a qualified service person. This could be
such things as: Noisy flame due to burner being lit back or parts being dislodged during cleaning. Do not use the
appliance if the ceramic surface is accidently damaged, contact your local service agent
GENERAL ASSEMBLY PROCEDURE FOR
INSTALLATION
PLEASE READ AND KEEP FOR FUTURE REFERENCE
THE GAS OPERATION
Assembly of the Wok burner
1.
Ensure that the locating pin `A` on the distributor
ring is securely located in the recess hole of the
WOK burner body. This is easily achieved by
placing the distributor ring on the WOK body and
then rotating the distributor until the locating
bezzle `A` drops into the recess with a firm level
fit being then accomplished.
2.
The black dress ring should then be fitted over the
top Of the distributor ring.
3.
The outer burner cap should then be placed
onto the distributor ring with the locating pin `B`
securely locating in the location recess `B` of the
distributor ring. When correctly assembled the
cross over on the outer cap should lie adjacent to
the spark electrode protruding from the burner
body.
4.
Finally, gently place the inner burner cap into
position in the centre of the WOK burner.
WARNING
If the ceramic surface is cracked, switch off to avoid the possibility of electrical shock.
