BEFORE THE FIRST USE
BLENDER OPERATION
Check that all parts are complete and not damaged. Choose the appropriate attachment to
perform your desired task. The blender attachment is suitable for blending fruits or vegetables or
crushing ice. Clean the attachment according to the section “CARE AND MAINTENANCE”.
WARNING:
The blade is sharp, handle with great care and ensure that unplug the appliance from
outlet before assembling and removing parts.
• Lay the motor unit on the flat horizontal surface and make sure it is unplugged.
NOTE:
There is a safety interlock device at the bottom of jar, if the jar is not assembled in place,
the blender will not operate.
• Open the jar cover by turning anticlockwise and place the jar on a flat surface. Peel or core the
fruits or vegetables and then cut them into small pieces, then put them into the jar. Install jar
base onto the jar by turning clockwise, then reverse the whole jar assembly and install it onto
motor unit by turning clockwise. Usually, a certain amount of purified water has to be added to
facilitate the smooth running of appliance. The amount of mixture should not exceed the max
level as indicated on the jar, nor sit lower the min level. The best proportion of the fruits or
vegetables and water is 2:3.
• For blending function: for example: the quantity of pineapple, lemon, orange (size
:
15*15*15mm),
the best proportion of the fruits and water is 2:3 Food formula:
NOTE:
The blender is not applicable for beating egg white, mashing potatoes and mixing dough.
• Set the Speed Selector to “ OFF ” Position, then plug into power outlet and set Speed Selector
to your desired setting. You can turn the speed selector to “PULSE” without releasing it if
required to accelerate the process of blending. The detailed information is shown in below fig.2
4
ATTACHMENT FOOD TYPE WEIGHT / SPEC. TIME
Blender with jar
Blender with small jar
Blender with jar
Carrot
Carrot
Ice crush
carrots: 0.53 lb,
Water: 0.10 gal
carrots: 0.26 lb,
Water: 0.05 gal
Total Weight: max 0.11 lb;
Size: 2cm* 2cm *2cm
Temperature -64.4
1 minute
1 minute
Selector “PULSE” function
(On 2secs.+Off 2secs.) x10 Cycle
Fig.2
