manualshive.com logo in svg

High-Flying HF-LPC100, User Manual

The High-Flying HF-LPC100 User Manual is your comprehensive guide to harnessing the maximum potential of this cutting-edge product. With step-by-step instructions and detailed illustrations, this manual unlocks the full range of features and functionalities. Download it for free from manualshive.com to get started on your high-flying adventures.

Share
Download
background image

HF-LPC100 Wi-Fi/Bluetooth Module User Manual 

Shanghai High-Flying Electronics Technology Co., Ltd 

 

www.hi-flying.com 

  - 1 - 

HF-LPC100 

Wi-Fi/Bluetooth Module User Manual 

V 1.0 

 

Overview of Characteristic 

 

Support 802.11b/g Wireless Standard, STA Mode 

 

Support Bluetooth 2.1+EDR Standard 

 

Support Bluetooth SmartLink 

 

Cost Effective Solution With High-Flying MCU 

 

Support UART/GPIO Data Communication Interface 

 

Support Wireless/Remote Firmware Upgrade 

 

Provide SDK for Application develop 

 

Support Internal/External Antenna Option 

 

Smallest Size

：

23.1mm x 32.8mm x (3.45

±

0.3)mm 

 

Wide Input Voltage

：

3.3V~ 4.2V 

 

FCC/CE Certificated 

 

High-Flying

Summary of Contents for HF-LPC100


































































Reviews:

No comments

Related manuals for HF-LPC100

Parasound 7100 Owner'S Manual preview
7100
Brand: Parasound Pages: 72
Jafar 7010 Operation And Maintenance Manual preview
7010
Brand: Jafar Pages: 15
IBM 1620 Manual Of Instruction preview
1620
Brand: IBM Pages: 12
K&K M9700 Installation Instructions Manual preview
M9700
Brand: K&K Pages: 10
Harmonic Drive LA Series Manual preview
LA Series
Brand: Harmonic Drive Pages: 25
Nelson MR Technical Application Manual preview
MR
Brand: Nelson Pages: 8
ECKELMANN VS 3010 BS Operating Instruction preview
VS 3010 BS
Brand: ECKELMANN Pages: 178
Samson 3277 Quick Manual preview
3277
Brand: Samson Pages: 2
MacDon FM100 Installation Instructions Manual preview
FM100
Brand: MacDon Pages: 32
K&K M7500 Installation Instructions Manual preview
M7500
Brand: K&K Pages: 6
NAPCO Gemini GEM-P9600 Installation Instructions Manual preview
Gemini GEM-P9600
Brand: NAPCO Pages: 6
NAPCO Gemini GEM-P816 Programming Instructions Manual preview
Gemini GEM-P816
Brand: NAPCO Pages: 56
Watlow F4T Installation And Troubleshooting User’S Manual preview
F4T
Brand: Watlow Pages: 59
Watts Tekmar WiFi Snow Melting Control 670 Installation Manual preview
Tekmar WiFi Snow Melting Control 670
Brand: Watts Pages: 48
Eaton FC18 User Manual preview
FC18
Brand: Eaton Pages: 10
Idemia SIGMA Series Quick User Manual preview
SIGMA Series
Brand: Idemia Pages: 29
Samson 3756 Mounting And Operating Instructions preview
3756
Brand: Samson Pages: 56
EasyIO FG-20 Installation Manual preview
FG-20
Brand: EasyIO Pages: 17

Brands by name

Popular brands

Load more brands