High-Flying HF-LPC100 User Manual Download Page 21

Page: 21 / 65

HF-LPC100 Wi-Fi/Bluetooth Module User Manual

Shanghai High-Flying Electronics Technology Co., Ltd

www.hi-flying.com

- 21

2.4.

Bluetooth Function

User can easily and quickly configure the module connect to AP Via LPC100 Bluetooth function. Detail

steps as follow:



User configure the module enter into Bluetooth quick link mode via smart link button or AT

command.



Use smart terminal search the Bluetooth

on module and connect, system will indicate it‘s a audio

device.



Run the app on smart terminal, input SSID, password and confirm



Module automatically receive the data and decode and obtain the total configure dat. The whole

process is less than 3 second, and success rate is nearly 100%



Module automatically switch to Wi-Fi mode and connect to appointed AP

Please check Appendix D for details

2.5.

Firmware Upgrade

HF-LPC100 support below online upgrade methods:

Compared to traditional UART upgrade, HF-LPC100 support more flexible and convenient method to

realize the update of firmware and application.

HF-LPC100 module also support upgrade from remote HTTP server, keep module connects to AP

router before execute remote HTTP upgrade. Remote upgrade have two methods:

Direct Download

and Upgrade

Configure File Based Upgrade



Configure file based upgrade

AT+UPURL command to set the remote directory which the configuration file located.

For example

：

AT+UPURL=http://www.hi-flying.com/!admin/down/

Notes: The last ‘/‘ can‘t be remove

AT+UPFILE command to set the configuration file name, such as AT+UPFILE=config.txt

AT+UPST command to start remote Application upgrade. After excuate this command, the module will
firstly download configuration file (―config.txt‖), then download the upgrade file base on the URL

address listed in the configure file.

General ―config.txt‖ file format as following example:

[URL]=http://10.10.100.100:80/lpb.bin

[URL]= the URL address of Application.



Direct Download and Upgrade

AT+UPURL command to set the remote directory and file name, such as:

AT+UPURL=http://www.hi-flying.com/!admin/down/,lpb.bin

After exe

cuate this command, the module will directly download the ―lpb.bin‖ file from remote directory

and start upgrade Application.

High-Flying

Summary of Contents for HF-LPC100


































































Search results

Summary of Contents for HF-LPC100

Reviews:

Related manuals for HF-LPC100

Brands by name

Popular brands

High-Flying HF-LPC100, User Manual

Search results

Summary of Contents for HF-LPC100

Reviews:

Related manuals for HF-LPC100

Brands by name

Popular brands