Trackspot User Manual
Unpacking Trackspot®
1-1
1
Chapter 1
Setup and Assembly
Unpacking Trackspot
®
Unpack your fixture and verify that it arrived complete and without
any damage.
Saving the Shipping Materials
Do not discard the shipping carton and packing materials. The carton
and packing materials are specifically designed to protect the product
during transport.
High End Systems assumes no responsibility for products that have
been damaged during transport. Therefore, you should return a
product for repair in its original shipping carton and packing materials.
Note:
Before sending anything to the factory, call your High End
Systems dealer/distributor for a Return Material
Authorization (RMA) number. The factory cannot accept
any goods shipped without an RA number.
Inspecting the Contents
Carefully unpack the carton and inspect the contents for damage. If
any of the items in the following list are missing or damaged, notify
both the shipping agent and your sales agent immediately.
•
Trackspot fixture
•
set of five Philips
®
QT 8500, 250 W lamps
•
yoke (yoke screws and T-handles are already installed on the
fixture.)
Installing the Yoke
You will need:
• 1/4 inch allen wrench
• two 1/4 inch yoke screws*
• two clamping T-handles*
• yoke*
*These items are shipped with the Trackspot fixture.
