High End Systems Studio Command 1200, User Manual

Page: 41 / 108

CHAPTER 3
The Menu System
Studio Command Series User Manual 31
Copying User Settings (SETT)
Use this menu item to copy the fixture’s user settings from one user mode to the other. The user
settings for each user type are listed in the section titled Setting the User Type (USER) on page
30. This options copies all user settings at one time.
To copy user settings:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the MODE menu. Press <Enter> to select.
3. Scroll to the USER menu (this will be the first option displayed). Press <Enter>.
4. Scroll to the COPY menu. Press <Enter> to select.
5. Scroll to the SETT menu. Press <Enter> to select.
6.
or
Scroll to A
→
B to copy User A settings to User B, or B
→
A to copy User B settings
to User A.
7. Press <Enter>.
Copying User Presets and Settings (ALL)
Use this menu item to copy the fixture’s 16 user preset scenes and fixture settings from User A
to User B or vice versa. The user settings for each user type are listed in the section titled
Setting the User Type (USER) on page 30.
Note: This options copies all user settings and all 16 presets at one time.
To copy user presets and settings:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the MODE menu. Press <Enter> to select.
3. Scroll to the USER menu (this will be the first option displayed). Press <Enter>.
4. Scroll to the COPY menu. Press <Enter> to select.
5. Scroll to the ALL menu. Press <Enter> to select.
6.
or
Scroll to A
→
B to copy User A presets and settings to User B, or B
→
A to copy all
User B presets and settings to User A.
7. Press <Enter> to store selection.